How To Change Tire On A 20002 Chevy Venture Van
This article volition prove y'all how to lift a Chevy Venture van using a floor jack and jack stands.
This procedure may work on other vehicle types and models, such as cars and trucks. The key is to use the proper sized heavy duty floor jacks and jack stands to lift your vehicle, and locate the proper area of the vehicles frame to place the jack and stands.
Warnings
- Please use caution and follow all manufacturers instructions and warnings. Refer to you vehicles owner transmission for consummate instructions. Follow all safety instructions and guidelines. Work on an even surface.
Yous Will Need:
- Heavy duty floor jack (2 ton and up weight capacity recommended).
- 1-2 heavy duty jack stand(s) (Note: jack kits are available at your local auto parts store).
- Bricks, heavy rocks, or heavy wooden beams to keep van from rolling.
- Any safety equipment and tools needed for your vehicle repair job.
To Raise the Vehicle
1. Place a brick, prissy-sized heavy rock, or axle in front and back of your vehicle tires and apply the emergency brake to hinder the van from rolling dorsum or along.
2. Utilize a heavy duty floor jack and identify it nether the van, on the side, positioning information technology somewhere around the middle of the frame. Avert all hoses, lines, and tubing of any sort.
3. Slowly pump the floor jack (following manufacturers instructions) to lift the van off the ground until it is lifted high enough to comfortably work under (do not exceed the max top of your jack stands by more than a couple inches).
iv. Prepare your jack stand(due south) into place nether the van on the frame underneath the van, placing one near the forepart behind the front tire, and the other jack stand up should exist placed near the back before the rear tire.
5. Slowly lower the flooring jack (following manufacturers instructions) onto the jack stands and pull information technology out from under the van. You lot are now ready to piece of work under the side of your van.
To lift the back or front end end of the vehicle, follow the same procedures, only this time identify the floor jack in the middle back or forepart areas of (depending on where you're working) the van frame. Slowly pump the flooring jack, put your jack stands into place, and slowly lower jack onto the jack stands.
To Lower the Vehicle
1. Identify the floor jack under van below the frame at the aforementioned place you used to lift the vehicle. Pump jack and elevator van a couple inches higher up the height of your jack stands.
2. Remove the jack stands from under the van using caution not to bump or move the floor jack.
3. After the jack stands are removed from nether the van, Practice NOT go dorsum under the vehicle. Slowly release the floor jack pressure level to lower the van to the footing.
4. Pull the floor jack out from underneath the vehicle and remove the holding bricks, rocks, or beams from effectually the tires.
Want to master Microsoft Excel and take your work-from-home chore prospects to the side by side level? Jump-starting time your career with our Premium A-to-Z Microsoft Excel Training Bundle from the new Gadget Hacks Shop and become lifetime admission to more than than xl hours of Basic to Advanced instruction on functions, formula, tools, and more.
Buy Now (97% off) >
Other worthwhile deals to check out:
- 97% off The Ultimate 2021 White Chapeau Hacker Certification Bundle
- 98% off The 2021 Accounting Mastery Bootcamp Bundle
- 99% off The 2021 All-in-1 Data Scientist Mega Parcel
- 59% off XSplit VCam: Lifetime Subscription (Windows)
- 98% off The 2021 Premium Learn To Lawmaking Certification Package
- 62% off MindMaster Heed Mapping Software: Perpetual License
- 41% off NetSpot Abode Wi-Fi Analyzer: Lifetime Upgrades
How To Change Tire On A 20002 Chevy Venture Van,
Source: https://diy-auto-repair.wonderhowto.com/how-to/jack-up-chevy-venture-van-0134256/
Posted by: duranhishentimed.blogspot.com
0 Response to "How To Change Tire On A 20002 Chevy Venture Van"
Post a Comment